Change font size
It is currently Sun Sep 15, 2019 9:56 pm
www.macrofibercomposite.com
Board index Energy Harvesting

Energy Harvesting

Suitable material to bond the MFC to

Using the MFC for Energy Harvesting Applications

Moderator: TPD

Suitable material to bond the MFC to

Postby drsiana » Mon Jan 22, 2018 11:23 am

You recommend on the website glass fibre composite or carbon fibre composite, thickness 1mm.

I'm unsure of how flexible this would be to do a comparison with what I have been able to obtain from our workshop.

I have some "MTM28/CF1218 – 200 gsm 6k T800 Carbon 2 x 2 Twill Prepreg" made by CYTEC - it would seem to me to be ok, but I was wondering if you would confirm whether this would be suitable? Or maybe not flexible enough?
Thanks
drsiana
 
Posts: 3
Joined: Thu Jan 18, 2018 7:07 am

Re: Suitable material to bond the MFC to

Postby TPD » Mon Jan 22, 2018 6:32 pm

As long as you cure the Prepreg :lol: Just kidding.
Sure will work as long as you make at least 0.8mm thick
for energy harvesting.
TPD
Smart Material Support Team
---------------------------
"That's not right, it's not even wrong."
Wolfgang Pauli, 1945 Nobel Laureate - Physics.
TPD
 
Posts: 98
Joined: Tue Aug 11, 2015 12:46 pm
Location: Florida, USA


Return to Energy Harvesting

cron

User Control Panel

Login



www.macrofibercomposite.com

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 30 minutes)
Most users ever online was 248 on Fri Nov 30, 2018 6:46 am

Users browsing this forum: No registered users and 1 guest

Birthdays

No birthdays today